文章
  • 文章
  • 产品
Search

news information

新闻资讯

Details

Home common lamps and lanterns routine maintenance

Lamps in later use, due to improper use and other reasons, lamps and lanterns may soon break down, bringing great inconvenience to daily life. Want to use the lamps and lanterns in the normal use of the term, you need to have the right maintenance methods for the lamps and lanterns, lamp master take you to understand what should be noted in the daily use of lamps and lanterns.

  1, lamps and lanterns must be used under the predetermined voltage and frequency.

  2, where there is grounding lamps and lanterns must often check the grounding situation.

  3, if there are special restrictions, the provisions of the lamps and lanterns are generally used in the ambient temperature of 5-35 ℃.

  4, indoor use of lamps and lanterns are not able to move to outdoor use.

  5, electrical, gas, kerosene stoves and other heaters above and their components or directly encounter the steam places, should not use ordinary light bulbs.

  6, lamps and lanterns within the specified wattage can not exceed the light bulb. If the light bulb power than the design power is small resulting in the brightness of the lamp does not meet the standard, if the light bulb power than the design power, may lead to a short circuit, more serious will cause a fire.

  7, find a professional lighting cleaning master for 1-2 times a year professional cleaning of lamps and lanterns, professional master cleaning at the same time to find the installation screws and anti-dislodging devices are not loose, corrosion, such as loose to tighten, such as the obvious corrosion phenomenon is required to repair or replace.

  8, change the light, disassemble the lampshade and fuse, must bear in mind that the power must be cut off.

  9, can not be placed near the paper and cloth and other items in the luminaire or cover the luminaire to prevent high temperature caused by fire.

  10, the application of warm water scrubbing or wringing soapy cloth scrubbing lamps, can not use gasoline, volatile oil, etc. scrubbing.

  11, the metal part of the lamps and lanterns can not be wiped with corrosive liquids, to prevent damage to the metal layer of protective film, resulting in rust.

  12, in the use of lamps and lanterns in the process of abnormal conditions, should stop using, cut off the power supply, check.

  13, regular maintenance of the use of lamps and lanterns, welding in the process of use will occur chemical reactions, especially prone to aging, these include drivers, welding, sockets, screws, wires, etc.. Change the deformed, rusted spare parts.

  14, check the lifting surface or load-bearing surface, whether there is deformation or load-bearing deficiency, if there is a need to strengthen

General lamps and lanterns are quite long life, if you can give reasonable maintenance and replacement of lamps and lanterns in use, I believe that the lamps and lanterns can maintain a long time in good condition during the life of the lamp, while ensuring the safety of users.

http://shak.yunlabo.com/1521162567.jpg


Customer service hotline: 0760-22229575 Monday to Friday, 8:00 am - 21:00 pm

Add: No.44, Tongxing West Road, Dongsheng Town, Zhongshan City, Guangdong Province

Company email: shakespear@ceilingfan.cc

Technical Support: 木子传媒 | Admin Login